Nylatron 703XL - Zero Stick Slip Nylon


Nylatron 703XL Product Description:

 

Nylatron 703XL is a new internally lubricated cast nylon for special area application. Zero stick / slip is its differentiating feature.

 

Why is "Zero Slip-Stick" Better?

Units equipped with Nylatron 703XL can accurately display smaller movements made possible by today's sophisticated control devices. Static and dynamic coefficients of friction that approximate each other at virtually every point over the Nylon Product's useful range, make this possible.

 

Key Features and Benefits:

  • No "Slip-Stick" for precise efficient control
  • Excellent mechanical strength to withstand high loads
  • Very abrasion resistant
  • Good thermal resistance
  • Good dimensional stability

 

Nylon Plastics Applications:

Wear pads; bearing blocks; wear guides; linear bearings and bushes; any load-bearing slide application especially in start / stop functions.


For more info about this product

  
E-mail Print

Nylatron 703XL - Zero Stick Slip Nylon


Physical Properties:

Specific Gravity: g/cm³ 1.11
Max Continuous Operating Temp: °C 105
Max Short Term Operating Temp (3-4hrs): °C 160
Tensile Strength: Mpa 60
Impact Resistance Charpy Unnotched: KJ/m² 25
Hardness: Rockwell M 59
Co-efficient of thermal expansion: m/(m.k) x 10¯6 85
Dielectric Strength: KV/mm 25
Surface Resistivity: Ohms 1x10¹²
Flammability Oxygen Index: % 20
Flammability UL94: HB
Food Grade: FDA No
Impact Resistance Charpy Notched: KJ/m² 3