Acrylic | HDPE | PVC | Polyurethane | Plywood Replacement | Polycarbonate Sheets | Marine Ply Substitute

 

Ertalon 6XAU- Heat Stabilised Nylon


6XAU+ Nylon Product Description:


Ertalon 6XAU+ is a heat stabilised cast nylon with a very dense and highly crystalline structure. It offers better technical properties than conventional extruded or cast nylons: superior resistance to creep and wear, better heat ageing performance and excellent machinability. ERTALON 6XAU+ is particularly recommended for bearings and other mechanical parts subject to wear which are operating at temperatures above 60 C.


Key Features and Benefits:
  • High mechanical strength
  • Good fatigue resistance
  • High mechanical damping ability
  • Good sliding properties
  • Excellent wear resistance

 

Nylon Plastics Applications:


Ertalon is used for a wide range of industrial components both for Original Equipment Manufacture and maintenance.

Some examples: sleeve and slide bearings, wear pads, support and guide wheels, conveyor rollers, tension rollers, tension rollers, sleeves for wheels and rollers, pulleys and pulley linings, cams, buffer block, hammer heads, scrapers, gear wheels, sprockets, seal-rings, feed screws, starwheels, cutting and chopping boards, insulators, etc.








For more info about this product



E-mail Print

Ertalon 6XAU- Heat Stabilised Nylon


Physical Properties:

Specific Gravity: g/cm³ 1.15
Max Continuous Operating Temp: °C 120
Max Short Term Operating Temp (3-4hrs): °C 180
Tensile Strength: Mpa 83
Impact Resistance Charpy Unnotched: KJ/m² No Break
Hardness: Rockwell M 87
Co-efficient of thermal expansion: m/(m.k) x 10¯6 80
Dielectric Strength: KV/mm 29
Surface Resistivity: Ohms >10^12
Flammability UL94: HB
Food Grade: FDA NO
Impact Resistance Charpy Notched: KJ/m² 3.5